Pedders 1.75 Inch Extra Heavy Duty Load Carrying and Towing Kit. With Assembled Foam Cell Struts. Isuzu D-Max

Pedders 1.75″ Extra Heavy Duty Load Carrying and Towing Kit with Assembled Foam Cell Struts – Isuzu D-Max

Improved load carrying, towing ability and ground clearance

Do you use your D-Max for load carrying and towing? Pedders Suspension has the solution.
This kit features our proven Pedders TrakRyder Foam Cell shocks, front coil springs, new rear leaf springs,
as well as the necessary bushes and U-bolts for installation.

This is our third-level heavy duty kit, designed primarily to raise the vehicle and significantly improve
its load carrying and towing performance. If your D-Max currently sits low at the rear when towing or carrying
heavy loads, and you operate in this condition most of the time, this kit will provide a major improvement
over the factory suspension.

This kit is intended for vehicles that run heavily laden at all times. Operating the vehicle unladen
with this kit is not recommended and will result in a harsh ride. Pedders recommend a
minimum of 600 kg load in the rear at all times.
Keep in mind that an average canopy and tow bar together weigh approx. 130–150 kg.

The kit raises the vehicle by approx. 40 mm (see dimensions below), improving ground clearance and stance.
It can also be used to accommodate larger tyres. The quoted dimensions assume a standard vehicle.
Additional front equipment such as a winch or bull bar will affect the final installed height.
In such cases, different springs may be required – please contact us for tailored advice.

The fully assembled Ezifit struts in this kit allow quick and simple installation.
Each strut includes a Pedders Foam Cell shock, Pedders spring, new top mount, bump stop and boot.
No spring compressors are needed, and no old parts are reused – simply bolt them straight on.
After fitting, we strongly recommend a professional wheel alignment for optimum performance.

Still not sure if this is the correct kit for you? Our Pedders team will be happy to assist with any questions.

Key Features

• Extra heavy duty kit
• Approx. 40 mm lift
• Improved load carrying and towing capability
• Increased off-road ground clearance
• Sintered iron piston shocks with large 40 mm bore
• Premium-grade steel coils
• Backed by a 2-year / 25,000-mile warranty

Vehicle Height Information

• Front: Approx. +40 mm over standard
• Rear: Approx. +40 mm over standard
• Notes: Heights should be measured as shown in the secondary product image. Actual results may vary depending on vehicle condition and accessories.